|
STANDARD FEATURES FANUC MXP-200i CONTROL | Powerful 30 HP Spindle Output | High Speed 30 Tool Swing-Arm ATC System | | High Precision Ceramic Spindle Bearings | Random Access & Bi-Directional ATC Magazine | | IDD SPINDLE DESIGN WITH 12,000 RPM Maximum | 80 blocks look ahead, 2MS PROCESSING SPEED | | Oil-air mist lubrication for spindle bearings | AI nano CONTOUR CONTROL WITH ANTI jerk FUNCTION | | Pre-Tensioned Hardened & Ground Ballscrew | AC Digital Servo & Spindle Drives VECTOR HRV3 | | EXTENDED 25.6” Y-AXIS TRAVEL / 1,890 RAPID X&Y | ABSOLUTE encoders w/ 1 millionths PLUS resolution | ULTRA RIGID ROLLER LINEAR GuideS WAY On X,Y,Z | 1280 meter of memory w/ 100mps ethernet function | PISTON TYPE Automatic Lubrication System | PCMCIA SLOT FOR MEMORY EXPANSION & MODEM | 158 Gal Coolant System | 10.4” LCD monitor w/ dynamic graphic display | DUAL CHIP AUGERS ON BOTH SIDES OF Y- axis | manual guide I conversational software | Spindle Air Curtain & Cutting air blast | 1G ACCELERATION & DECEleRATION CONTROL | Spindle Cooling System / CHILLER | macro B & skip function | COOLANT GUN & AIR GUN, saFEty door | high speed rigid tapping & helical interpolation | High Quality & Rugged MEEHANITEÒ Castings | 3-D Dynamic tool path graphics | BASIC SPECIFICATIONS HEADSTOCK Motor FANUC AC Digital Spindle Motor Horse Power 30 HP Maximum Speed 12,000 rpm Spindle Drive IDD Spindle Spindle Nose to Table 3.15” ~ 27.17” Spindle Center to Z-axis Way Cover 26.2” TABLE Size 64.17” x 25.59” T-Slots 6 x 0.70” x 3.93” Maximum Load 3,300 lbs Table height 37.4” ATC SYSTEM (FACE AND TAPER CONTACT ON BBT-40 TOOL HOLDER) Tool Type BBT-40 (optional CAT-40) Tool Selection Bi-directional, Random Access Maximum Tool Weight 13.2 lbs Maximum Tool Length 11.81” Maximum Tool Diameter 2.99” / 4.92” (when adjacent pocket is empty) Magazine Tool Capacity 30 Tool Change Time (Approx.) 1.9 sec. (T-T) / 4 sec. (C-C) AXES SPECIFICATIONS Travel Positioning Repeatability Rapid Rate / Cutting Feed X Axis 60.2” 0.00015” ± 0.00012” 1,890 ipm / 787 ipm Y Axis 25.6” 0.00015” ± 0.00012” 1,890 ipm / 787 ipm Z Axis 24.0” 0.00015” ± 0.00012” 1,890 ipm / 787 ipm GENERAL Machine Net Weight 22,000 lbs. Shipping Weight 23,400 lbs. Power Consumption 33 kVA Floor Spacing (W x D x H) 174” x 110” x 120” Shipping Dimensions (W x D x H)  DETAILED SPECIFICATIONS HEADSTOCK Spindle Motor FANUC AC a 8T Digital Spindle Motor Horsepower 30 HP Spindle Drive Isolated Direct Drive Motor (patent pending) RPM Range 100 ~ 12,000 rpm Spindle Bearing Type Angular Contact Ceramic Bearings Bearing Class ABEC Class 7 (P4A) Spindle Taper Hardness / Material HRC62 ± 1.5° / SCM21 Spindle Draw Bar Type Collet Style Retention System Helical Disc Spring Holding Force 2,100 ~ 2,400 lbs. Counter Balance Electronics Spindle Orientation Built-in Positioning Encoder Spindle Nose to Table 3.15” ~ 27.17” Spindle Center to Z-axis Way Cover 26.2” TABLE Dimensions: Length 64.2” Width 25.6” T-Slots 6 x 0.70” x 3.93” Maximum Table Load 3,300 lbs. Height from Floor 37.4” AUTOMATIC TOOL CHANGER Changer Dual Swing Arm Type Tool Change Time 1.9 Seconds (tool to tool) 4 seconds (chip to chip) Maximum Tool Weight 13.2 lbs. Maximum ATC Weight 330 lbs. Maximum Tool Length 11.8” Magazine Tool Selection Bi-directional, Random Access Maximum Diameter of Tools Adjacent Pocket Tooled 2.99” Adjacent Pocket Empty 4.9” Maximum Number of Tools 30 Tool Shank BBT-40 (CAT-40 optional) Air Requirements 85 psi Minimum X AXIS Ballscrew: Diameter 1.77” Class JIS C3 Pitch 0.629” Feed Rate: Rapid Traverse 1,890 ipm Cutting Feed Rate 0.04 ~ 787 ipm Travel: 60.2” Accuracy: Linear Positioning 0.00015” (JIS 6338) Repeatability ± 0.00012” (JIS 6338) Horse Power 6 HP Thrust Force: Rated 1,268 lbs. Thrust Force: Max 3,172 lbs.
DETAILED SPECIFICATIONS Y AXIS Ballscrew: Diameter 1.77” Class JIS C3 Pitch 0.629” Feed Rate: Rapid Traverse 1,890 ipm Cutting Feed Rate 0.04 ~ 787 ipm Travel: 25.6” Accuracy: Linear Positioning 0.00015” (JIS 6338) Repeatability ± 0.00012” (JIS 6338) Horse Power 7.4 HP Thrust Force: Rated 1,268 lbs. Thrust Force: Max 3,172 lb Z AXIS Ballscrew: Diameter 1.77” Class JIS C3 Pitch 0.625” Feed Rate: Rapid Traverse 1,890 ipm Cutting Feed Rate 0.04 ~ 787 ipm Travel: 24.0” Accuracy: Linear Positioning 0.00015” (JIS 6338) Repeatability ± 0.00012” (JIS 6338) Horse Power 7.4 HP Thrust Force: Rated 1,586 lbs. Maximum 3,570 lbs. COOLANT TANK CAPACITY 158 gal. DIMENSIONS Floor Spacing (W x D x H) 174” x 110” x 120” Shipping (W x D x H) WEIGHT Net 22,000 lbs. Shipping 23,400 lbs. POWER REQUIREMENTS 208 VAC Line Voltage AC 3 Phase Breaker Size 85 AMPS MACHINE DIMENSIONS 
MACHINE DIMENSIONS 
|
YCM CNC 
