|
TV-116B STANDARD FEATURES | Powerful 25 HP Spindle Motor | Fast 24 Tools Swing-Arm ATC | | | 6,000 rpm Maximum Spindle Speed | Random Access/Bi-Directional Magazine | | | 347 ft-lb. of Torque at 375 rpm | 1280 METER OF MEMORY | | | Extra-Wide Hardened & Ground Ways | 10.4” LCD monitor w/ dynamic graphic display | | World Patented One piece T-Base Design | PCMCIA SLOT, RS 232 INTERFACE & ETHERNET | | Precision Hardened & Ground Ballscrews | manual guide i conversational software | | Dual Chip Augers on Machine Base | AI NANO CONTOUR CONTROL WITH ANTI JERK | | Turcite-B Coated Slide Ways | Full Alphanumeric Keyboard | OILMATIC SPINDLE COOLING SYSTEM | Coodinate rotation & position switch function | SPINDLE & Cutting air blast | macro B & high speed skip function | Handheld coolant and air gun | high speed rigid tapping & helical interpoation | Heat Exchanger for the Electrical Cabinet | 80 BLOCK LOOK AHEAD, 2MS PROCESSING SPEED | High quality & rugged MEEhanite casting | Coolant thru spindle prepPed | BASIC SPECIFICATIONSHEADSTOCK Motor FANUC AC Digital Spindle Motor Horse Power 25 HP (30 Min.) Spindle Drive 2 Speed, Geared Head Transmission Maximum Speed 6,000 rpm Spindle Nose to Table 6.6” ~ 31.4” Spindle Center to Z-axis Way 24.2”TABLE Size 47.2” x 23.6” T-Slots number, width, pitch 5 x 0.71”x 3.94” Maximum Load 2,640 lbs. Height from Floor 32.0”ATC SYSTEM Tool Type CAT-50 (optional BT-50) Tool Selection Bi-directional, Random Access Maximum Tool Weight 33 lbs. Maximum Tool Length 13.7” Maximum Tool Diameter 4.92” / 7.48” (when adjacent pocket is empty) Magazine Tool Capacity 24 Tool Change Time (Approx.) 3.8 sec. (T-T) / 9~11 sec. (C-C)AXES SPECIFICATIONS Travel Positioning Repeatability Rapid Rate / Cutting Feed X Axis 43.3” ± 0.00016” ± 0.00008” 630 ipm / 394 ipm Y Axis 23.6” ± 0.00016” ± 0.00008” 630 ipm / 394 ipm Z Axis 24.8” ± 0.00016” ± 0.00008” 630 ipm / 394 ipmGENERAL Machine Net Weight 23,320 lbs. Shipping Weight 25,520 lbs. Power Consumption 43 kVA Floor Spacing (W x D x H) 125” x 122” x 121” Shipping Dimensions (W x D x H) 132” x 124” x 134”
DETAILED SPECIFICATIONSHEADSTOCK AC Spindle Motor Fanuc a15 High Torque AC Digital Spindle Motor Horsepower 20 HP/25 HP 30 minutes Spindle Drive 2 Spd Gear Head Transmission (High/Low Gear Ratio 1:7) R.P.M. Range 45-6,000 RPM Low Gear 45-1,500 RPM High Gear 1,501- 6,000 RPM Spindle Bearings Type 2 Double Sets Lower Bearings Angular Contact Ball Bearing ABEC Class 7 Upper Bearings Cylindrical Roller Bearing ABEC Class 7 Spindle Taper Hardness / Material HRC62 ± 1.5° / SCM21 Retention System Beveled Springs Holding Force 3,964 lbs. Counter Balance Mechanical Weight Spindle Orientation Positioning Encoder Spindle Nose to Table 6.6” ~ 31.4” Spindle Center to Z-axis Way 24.2” TABLE Dimensions: Length 47.2” Width 23.6” T-Slots 5 x 0.71”x 3.94” Maximum Table Load 2,640 lbs. Height from Floor 32.0” AUTOMATIC TOOL CHANGER Changer Dual Swing Arm Type Tool Change Time 3.8 Seconds (tool to tool) 9~11 seconds (chip to chip) Maximum Tool Weight 33 lbs. Maximum Tool Length 13.7” Magazine Tool Selection Bi-directional, Random Access Maximum Diameter of Tools Adjacent Pocket Tooled 4.9” Adjacent Pocket Empty 7.4” Magazine Capacity Total of Tool Number 24 Total of Tool Weight 726 lbs. Tool Shank CAT-50 (BT-50 optional) Air Requirements 85 psi Minimum X AXIS Ball screw: Diameter 1.771” Class JIS C3 Pitch 0.393” Feed Rate: Rapid Traverse 630 ipm Cutting Feed Rate 0.04 ~ 394 ipm Travel: 43.3” Accuracy: Linear Positioning ± 0.00016” (JIS 6338) Repeatability ± 0.00008” (JIS 6338) Horse Power 4 HP Rated Thrust Force 1,265 lbs. Max. Thrust Force 2,591 lbs. DETAILED SPECIFICATIONS Y AXIS Ball screw: Diameter 1.771” Class JIS C3 Pitch 0.393” Feed Rate: Rapid Traverse 630 ipm Cutting Feed Rate 0.04 ~ 394 ipm Travel: 23.6” Accuracy: Linear Positioning ± 0.00016” (JIS 6338) Repeatability ± 0.00008” (JIS 6338) Horse Power 4 HP Rated Thrust Force 1,265 lbs. Max. Thrust Force 2,591 lbs. Z AXIS Ball screw: Diameter 1.771” Class JIS C3 Pitch 0.393” Feed Rate: Rapid Traverse 630 ipm Cutting Feed Rate 0.04 ~ 394 ipm Travel: 24.8” Accuracy: Linear Positioning ± 0.00016” (JIS 6338) Repeatability ± 0.00008” (JIS 6338) Thrust Force: Rated 2,787 lbs. Maximum 5,588 lbs. COOLANT TANK CAPACITY 64 gal. DIMENSIONS Floor Spacing (W x D x H) 125” x 122” x 121” Shipping (W x D x H) 132” x 124” x 134” WEIGHT Net 23,320 lbs. Shipping 25,520 lbs. POWER REQUIREMENTS 208 VAC Line Voltage AC 3 Phase Breaker Size 120 AMPS
|
SNK Nissin 
